INTEL WIRELESS
Wired Stuff
WiFi Tablet Corner
My80211 White Papers (Coming Soon!)

Cisco Wireless Compatibility Matrix (Nov. 2011)

Podcasts / Videos

My80211 Videos

Cisco: 802 11 frames with Cisco VIP George Stefanick

Fluke Networks: Minimize Wi Fi Network Downtime

Aruba: Packets never lie: An in-depth overview of 802.11 frames

ATM15 Ten Talk “Wifi drivers and devices”

Houston Methodist Innovates with Wireless Technology

Bruce Frederick Antennas (1/2)

 

Bruce Frederick dB,dBi,dBd (2/2)

Cisco AP Group Nugget

Social Links
Revolution WiFi Capacity Planner

Anchor / Office Extends Ports

 

Peek Inside Cisco's Gear

See inside Cisco's latest wireless gear!

2.4 GHz Channel Overlap

EXAMPLE 1  

EXAMPLE 2

EXAMPLE 3  

CWSP RELEASE DATE 2/08/2010
  • CWSP Certified Wireless Security Professional Official Study Guide: Exam PW0-204
    CWSP Certified Wireless Security Professional Official Study Guide: Exam PW0-204
    by David D. Coleman, David A. Westcott, Bryan E. Harkins, Shawn M. Jackman

    Shawn Jackman (Jack) CWNE#54 is a personal friend and has been a mentor to me for many years.  I've had the pleasure and opportunity to work with Jack for 4 years. Jack is a great teacher who takes complex 802.11 standards and breaks them down so almost anyone can understand the concept at hand. I'm excited for you brother. Great job and job well done! Put another notch in the belt!

IEEE 802.11a/g/n Reference Sheet

 

LWAPP QoS Packet Tagging

 

 

Interference Types

BLUETOOTH
 

Microwave Oven
 

Cordless Phone

JAMMER!
 

Main | Site Survey: Intravenous WiFi (Survey Pole) »
Monday
Oct122015

More Power More Problems! When Excessive RF Power Degrades your WiFi Performance!

In the wireless world we often think more power is good. The louder the signal surely higher the performance gain. I’m sorry to say that’s not  true in most cases. RF power is like a delicate flower and should be treated with respect. Simply choosing a higher power output and not properly tuning your radios could cause you more pain than you really know. In this quick blog post, I share a pair of static bridges being bench tested 70 feet apart. The only difference in configuration is simply changing the RF power. While I only share the capacity values, the throughput values have been excluded to keep the focus on power.

Example #1 - (HOTTEST)

In this example we pump up the power @ 30 dBm.

(1) Link @ -17 dBm
(2) Modulation at 16 / 64 QAM
(3) TX Power 30 dBm
(4) Capacity Link TX 205, RX 200

 

Example #2 - (HOT)

In this example we power down to @ 24 dBm.

(1) Link @ -22 dBm
(2) Modulation at 256 / 256 QAM
(3) TX Power 24 dBm
(4) Capacity Link TX 396, RX 391

 

Example #3 - (PEACHY)

In this example we power down to @ 18 dBm.

(1) Link @ -27 dBm
(2) Modulation at 1024 / 1024 QAM
(3) TX Power 18 dBm
(4) Capacity Link TX 482, RX 469

 

Modulate Gain: 16 vs 1024 and 64 vs 1024
Capacity Link Gain: TX 205 vs 481, RX 200 vs 469

Why excessive power gain is bad is because it increases noise and distortion at the receivers radio. In Example #1, both radios can hear each other at -17 dBm! Think of it this way, imagine having someone in your ear with a megaphone yelling today’s lunch specials at you. You can’t hear so well, can you ? Take away the megaphone and step back a few feet and all is peachy.

My quick less-techy blog post for today! 

 

Cheers!

 

Reader Comments

There are no comments for this journal entry. To create a new comment, use the form below.

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>