INTEL WIRELESS
Wired Stuff
WiFi Tablet Corner
My80211 White Papers (Coming Soon!)

Cisco Wireless Compatibility Matrix (Nov. 2011)

Podcasts / Videos

My80211 Videos

Cisco: 802 11 frames with Cisco VIP George Stefanick

Fluke Networks: Minimize Wi Fi Network Downtime

Aruba: Packets never lie: An in-depth overview of 802.11 frames

ATM15 Ten Talk “Wifi drivers and devices”

Houston Methodist Innovates with Wireless Technology

Bruce Frederick Antennas (1/2)

 

Bruce Frederick dB,dBi,dBd (2/2)

Cisco AP Group Nugget

Social Links
Revolution WiFi Capacity Planner

Anchor / Office Extends Ports

 

Peek Inside Cisco's Gear

See inside Cisco's latest wireless gear!

2.4 GHz Channel Overlap

EXAMPLE 1  

EXAMPLE 2

EXAMPLE 3  

CWSP RELEASE DATE 2/08/2010
  • CWSP Certified Wireless Security Professional Official Study Guide: Exam PW0-204
    CWSP Certified Wireless Security Professional Official Study Guide: Exam PW0-204
    by David D. Coleman, David A. Westcott, Bryan E. Harkins, Shawn M. Jackman

    Shawn Jackman (Jack) CWNE#54 is a personal friend and has been a mentor to me for many years.  I've had the pleasure and opportunity to work with Jack for 4 years. Jack is a great teacher who takes complex 802.11 standards and breaks them down so almost anyone can understand the concept at hand. I'm excited for you brother. Great job and job well done! Put another notch in the belt!

IEEE 802.11a/g/n Reference Sheet

 

LWAPP QoS Packet Tagging

 

 

Interference Types

BLUETOOTH
 

Microwave Oven
 

Cordless Phone

JAMMER!
 

« Site Survey Hint: Attach your WiFi Phone to your Survey PC (VoIP Assessment) | Main
Saturday
Jan092010

Why you should consider "Monitor" Access Points as part of your Cisco Unified WLAN design and architecture

 

 

You are probably asking yourself, why!? Or perhaps, you did not know you could add access points in “Monitor” mode only. So, let’s deep dive this design consideration and why you as a Wireless Admin may want to consider deploying monitor access points in your WLAN.

We all seen the access point and client rogue alerts, signature attacks, (IDS, IPS) and other environment events on the WLC and WCS dashboard. Do you know how these alerts are gathered? This function is part of RRM (Radio Resource Monitoring/Management) Lets look how…

Cisco Unified (Lightweight) access points go off-line and conduct scans in the environment. Much like if you had a sniffer, in the area of the access point conducting the scan on your laptop.  During these scans the information gathered is sent to the WLC where this information is processed and displayed.  But here is the problem.   

Cisco Unified (Lightweight) access points only spends 0.2% off-channel scanning. Further more, the access point will only spend 60ms during EACH scan (10ms to switch channels and 50ms to scan the actual channel).  This activity is distributed across your WLAN so that adjacent access points are not scanning at the same time.

Note: In the presence of voice traffic (in the last 100 ms), the access points defer off-channel measurements.

I’ve completed specific testing with no monitor access points deployed in large enterprise environments, only using existing access points with default RRM monitoring enabled.

I conducted testing where I deployed a (1/6) access point ratio. By this I mean for every 6 production access points I would add (1) access point in monitor mode and found an increase of 25% increase on average of environment information. The reason for this increase is simple. Access points that are only on a channel for short intervals can not see every packet, while access points that are on channel can see far greater more packets. 

Additionally, Cisco unified access point modes include more then just monitor. It includes rouge detector and sniffer modes. Allowing you to leverage your monitor access points in more ways then one. 

In closing, you may want to consider deploying monitor access points in your design.

Reader Comments

There are no comments for this journal entry. To create a new comment, use the form below.

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>