INTEL WIRELESS
Wired Stuff
WiFi Tablet Corner
My80211 White Papers (Coming Soon!)

Cisco Wireless Compatibility Matrix (Nov. 2011)

Podcasts / Videos

My80211 Videos

Cisco: 802 11 frames with Cisco VIP George Stefanick

Fluke Networks: Minimize Wi Fi Network Downtime

Aruba: Packets never lie: An in-depth overview of 802.11 frames

ATM15 Ten Talk “Wifi drivers and devices”

Houston Methodist Innovates with Wireless Technology

Bruce Frederick Antennas (1/2)

 

Bruce Frederick dB,dBi,dBd (2/2)

Cisco AP Group Nugget

Revolution WiFi Capacity Planner

Anchor / Office Extends Ports

 

Peek Inside Cisco's Gear

See inside Cisco's latest wireless gear!

2.4 GHz Channel Overlap

EXAMPLE 1  

EXAMPLE 2

EXAMPLE 3  

CWSP RELEASE DATE 2/08/2010
  • CWSP Certified Wireless Security Professional Official Study Guide: Exam PW0-204
    CWSP Certified Wireless Security Professional Official Study Guide: Exam PW0-204
    by David D. Coleman, David A. Westcott, Bryan E. Harkins, Shawn M. Jackman

    Shawn Jackman (Jack) CWNE#54 is a personal friend and has been a mentor to me for many years.  I've had the pleasure and opportunity to work with Jack for 4 years. Jack is a great teacher who takes complex 802.11 standards and breaks them down so almost anyone can understand the concept at hand. I'm excited for you brother. Great job and job well done! Put another notch in the belt!

IEEE 802.11a/g/n Reference Sheet

 

LWAPP QoS Packet Tagging

 

 

Interference Types

BLUETOOTH
 

Microwave Oven
 

Cordless Phone

JAMMER!
 

Main
Saturday
Apr212012

Features Not Supported on Cisco Flex 7500 Controller

These features are not supported on Cisco Flex 7500 Series Controllers code 7.0.116.0, it could change in future versions:

•Local mode AP (However AP joins 7500 initially as local mode and should be converted to Flex Connect mode)

•Mesh

•LAG

•Client and RFID tag location

•CCX CAC

•STP

•7500 as guest anchor

•L3 Roaming (Centrally switched wlan -> same and inter-controller)

•Multicast (Multicast - Multicast and Multicast - Unicast). (ignore - 7500 gui interface may still show multicast-multicast config.)

•VideoStream

•TrustSec SXP

•IPv6/Dual Stack client Support

•WGB

•OEAP

•HotSpot2.0 (802.11u)

•Client rate limiting for centrally switched clients

Cisco Flex 7500 Series Controller does not support the 802.1x security variants on a centrally switched WLAN. For example, the following configurations are not allowed(and TAC does not support) on a centrally switched WLAN

•WPA1/WPA2 with 802.1x AKM

•WPA1/WPA2 with CCKM

•Dynamic-WEP

•Conditional webauth

•Splash WEB page redirect

If you want to configure your WLAN in any of the above combinations, the WLAN must be configured to use local switching.

Note:

•Flex7500 supports 1Gbps central switched data throughput for guest access

•Only Flex connect mode AP is supported for data traffic

•Static AP-manager interface

(Note: For Cisco 7500 Series controllers, it is not necessary to  configure an AP-manager interface. The management interface acts like an  AP-manager interface by default, and the access points can join on this  interface.)

•AP joined on local mode should be converted to Flex/Monitor, TAC does not support local mode AP services.

7.2.103.0 supports 802.1X on Centrally switched wlan unlike 7.0.116.0.

 

From: Saravanan Lakshmanan - Cisco CSC

https://supportforums.cisco.com/docs/DOC-23474

Reader Comments

There are no comments for this journal entry. To create a new comment, use the form below.

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>