INTEL WIRELESS
Wired Stuff
WiFi Tablet Corner
My80211 White Papers (Coming Soon!)

Cisco Wireless Compatibility Matrix (Nov. 2011)

Podcasts / Videos

My80211 Videos

Cisco: 802 11 frames with Cisco VIP George Stefanick

Fluke Networks: Minimize Wi Fi Network Downtime

Aruba: Packets never lie: An in-depth overview of 802.11 frames

ATM15 Ten Talk “Wifi drivers and devices”

Houston Methodist Innovates with Wireless Technology

Bruce Frederick Antennas (1/2)

 

Bruce Frederick dB,dBi,dBd (2/2)

Cisco AP Group Nugget

Social Links
Revolution WiFi Capacity Planner

Anchor / Office Extends Ports

 

Peek Inside Cisco's Gear

See inside Cisco's latest wireless gear!

2.4 GHz Channel Overlap

EXAMPLE 1  

EXAMPLE 2

EXAMPLE 3  

CWSP RELEASE DATE 2/08/2010
  • CWSP Certified Wireless Security Professional Official Study Guide: Exam PW0-204
    CWSP Certified Wireless Security Professional Official Study Guide: Exam PW0-204
    by David D. Coleman, David A. Westcott, Bryan E. Harkins, Shawn M. Jackman

    Shawn Jackman (Jack) CWNE#54 is a personal friend and has been a mentor to me for many years.  I've had the pleasure and opportunity to work with Jack for 4 years. Jack is a great teacher who takes complex 802.11 standards and breaks them down so almost anyone can understand the concept at hand. I'm excited for you brother. Great job and job well done! Put another notch in the belt!

IEEE 802.11a/g/n Reference Sheet

 

LWAPP QoS Packet Tagging

 

 

Interference Types

BLUETOOTH
 

Microwave Oven
 

Cordless Phone

JAMMER!
 

Main | 802.11 - Reason Codes and Status Codes »
Tuesday
Feb162016

802.11 Packet Capture Skillz To Pay The Bills

Digging deep into the Stefanick archives of real world 802.11 issues. I challenge YOU with 4 real world examples. Keep in mind sometimes the obvious is not so obvious. While frames don’t lie understanding 802.11 is important to see the truth. 

These are real customer issues on real networks with real problems.

PROBLEM #1: 

Customer complained of slow WiFi performance in a specific part of the warehouse. It's always been slow said one worker. It's never really preformed right since it was installed. 

During my packet capture I observed a lot of frames with a similar “bit" being marked. What “bit" could be a clue that might contribute to a slow network ?

 

ANSWER #1

If you answered retry bit you would be right. The retry counter was above 30% for channel 6. While the noise reference on channel was within reason the packet capture was a "bit" misleading displaying a -92. No pun intended. I turned on WiSpy, low and behold layer 1 interference. There were old security cameras operating on 2.4 no longer in use but still powered. The cameras were causing interference across channels 1 - 6, causing high retry rates. 

WiSpy 

 

 

PROBLEM #2: 

After a recent firmware update a number of Cisco 7925 phones exhibited an odd behavior. They would connect to the wifi network and then disconnect and display Locating Network Services. This happen repeatable.

I open my sniffer and see frames much like this one. 

ANSWER #2

If you answered duration timer you would be correct. The duration value caught my attention during troubleshooting. In the end it was a firmware bug on the handset due to an interoperability with a specific configuration and 802.11n access points. Note when a client sends a duration value, clients who can demodulate this frame will use this value and reset their clocks to busy. This was impacting the entire cell and not just the phones. 

 

Read this blog post in its entirety:

Reader Comments

There are no comments for this journal entry. To create a new comment, use the form below.

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>